ADS Environmental Services RainAlert II QR 775008 A2 - Manual (Page 4)

iv ADS RainAlert II Manual
Chapter 4 Communication 4-1
Setting Up Wireless Communication ............................. 4-2
Installing a Mini-wing or Slim Antenna .................. 4-4
Installing a Magnetic Whip Antenna ....................... 4-4
Modifying the RainAlert II Monitor to Support
an External Antenna ......................................... 4-5
Installing the SIM Card ........................................... 4-9
Providing Telephone Service ....................................... 4-14
Running the Telephone Cable Between the
Monitor and Service Locations ...................... 4-14
Mounting the Lightning Protection Module .......... 4-16
Preparing the Telephone Cable ............................. 4-17
Wiring the Telephone Cable to the Monitor ......... 4-19
Wiring the Telephone Cable to the Lightning
Protection Module .......................................... 4-21
Wiring the Lightning Protection Module to the
Network Interface Box ................................... 4-23
Connecting to the Monitor in the Field ........................ 4-26
Chapter 5 Configuration and Activation 5-1
Configuring the Monitor Location ................................. 5-2
Launching the Profile Software ............................... 5-2
Creating a Monitor Location ................................... 5-4
Selecting and Editing Devices ................................. 5-6
Setting the Communication Parameters ........................ 5-12
Activating the Monitor ................................................. 5-16
Configuring the Power Savings Parameters ................. 5-19
Running Diagnostics on the Rain Device ..................... 5-24
Collecting Data from the Monitor ................................ 5-30
Upgrading the Monitor Firmware ................................. 5-35
Viewing Diagnostic and Data Logs .............................. 5-38
Chapter 6 Maintenance and
Troubleshooting 6-1
Maintaining the System Components ............................. 6-2
Gathering Replacement Parts and Supplies ............. 6-2
Inspecting the Monitor ............................................ 6-3