Great Plains YP1625 Operator Manual - Manual (Page 84)

1625
401-182M 7/12/2005
82
Figure 96
Figure 97
Figure 98
Refer to Figure 96
1. When the tractor passes the second flag,
press engage again.
Refer to Figure 97
2. The display will show the error or difference
between the traveled distance and the dis-
tance calculated by the Controller.
Refer to Figure 98
3. If this is the first time the unit has been cali-
brated, this error can be large. Accept the new
speed calibration and re-run the course. Re-
calibrate until the error is within 5%. The cab
console will give you the option each time you
calibrate of accepting the new settings, or
keeping the previous settings.
22792
22793
22794