Great Plains YP1625 Operator Manual - Manual (Page 14)

1625
401-182M 7/12/2005
12
Owner Assistance
If you need customer service or repair parts, con-
tact a Great Plains dealer. They have trained
personnel, repair parts and equipment specially
designed for Great Plains products.
Refer to Figure 1
Your machine’s parts were specially designed and
should only be replaced with Great Plains parts.
Always use the serial and model number when or-
dering parts from your Great Plains dealer. The
serial-number plate is located on the front of the
left hand side of the center section as shown.
Record your planter model and serial number here
for quick reference:
Model Number:__________________________
Serial Number: ___________________________
Your Great Plains dealer wants you to be satisfied
with your new machine. If you do not understand
any part of this manual or are not satisfied with the
service received, please take the following
actions.
1. Discuss the matter with your dealership ser-
vice manager. Make sure they are aware of
any problems so they can assist you.
2. If you are still unsatisfied, seek out the owner
or general manager of the dealership.
3. For further assistance write to:
Product Support
Great Plains Mfg. Inc., Service Department
PO Box 5060
Salina, KS 67402-5060
21963
Figure 1
Serial Number Plate