Great Plains YP1625 Operator Manual - Manual (Page 46)

1625
401-182M 7/12/2005
44
Refer to Figure 50
12. Align the tabs on the hose end with the slots in
the meter hole and insert hose. Twist hose to
secure in place.
13. Refill meters by running the fan while station-
ary, before starting to plant.
NOTE: To change from the Finger Pickup meter to
the Precision meter requires the same steps.
Changing Seed Meter Wheel
Choose the correct seed meter wheel for the type
of seed you will be using. Be sure to use the same
wheel type on all meters.
Important: Seed meter wheels for the inter-
changeable meter 25 series row unit are made
of a green color material and are not inter-
changeable with the other Great Plains seed
meter wheels for other machines. Use only
green wheels in interchangeable meter 25 se-
ries row units.
14. Clean out meter. For more information see
“Cleaning Out Meters,” page 59.
Refer to Figure 51
15. Push in spring-loaded wheel retainer and
turn. Pull off wheel retainer and spring.
Refer to Figure 52
16. Pull seed meter wheel out about 1/4 inch and
spin backward to clean out seeds from top
pockets.
17. Remove seed meter wheel.
21919
21910
21912
Figure 50
Figure 51
Figure 52