Great Plains YP1625 Operator Manual - Manual (Page 22)

1625
401-182M 7/12/2005
20
Operating Instructions
This section covers general operating proce-
dures. Experience, machine familiarity and the
following information will lead to efficient opera-
tion and good working habits. Always operate
farm machinery with safety in mind.
Prestart Checklist
!
WARNING
Escaping fluid under pressure can have sufficient pres-
sure to penetrate the skin. Check all hydraulic lines
and fittings before applying pressure. Fluid escaping
from a very small hole can be almost invisible. Use pa-
per or cardboard, not body parts, and wear heavy
gloves to check for suspected leaks. If injured, seek
medical assistance from a doctor that is familiar with
this type of injury. Foreign fluids in the tissue must be
surgically removed within a few hours or gangrene
will result.
1. Carefully read “Important Safety Information,”
page 1.
2. Lubricate planter as indicated under “Lubrica-
tion,” page 64.
3. Check all tires for proper inflation. See “Ap-
pendix,” page 97.
4. Check all bolts, pins and fasteners. Torque as
shown in “Appendix,” page 97.
5. Check planter for worn or damaged parts. Re-
pair or replace parts before going to the field.
6. Check hydraulic hoses, fittings and cylinders
for leaks. Repair or replace before going to
the field.
7. Be sure Hydraulic hoses are securely held
out of the ball swivel area at hitch. Failure to
do so could cause hoses to pinch requiring
hose replacement.