Tweco PAK 200i - Manual (Page 15)

PAK 200i
Manual 0-5335 GENERAL INFORMATION 1-7
1.07 Declaration of Conformity
Declaration of Conformity
We Victor Technologies International Inc.
of 16052 Swingley Ridge Road
Suite 300
Chesterfield, MO 63033 U.S.A.
in accordance with the following Directive(s) :
2006/95/EC The Low Voltage Directive
2004/108/EC The Electromagnetic Compatibility Directive
hereby declare that :
Equipment: Plasma Cutting Power Supply
Model Name/Number: PAK 200i
Market Release Date: July 10th, 2014
is in conformity with the applicable requirements of the following harmonized standards :
Harmonized Standard of “EMC Directive”
EN 60974-10:2007 Arc Welding Equipment - Part 10: Electromagnetic compatibility (EMC)
requirements
Harmonized Standard of “Low Voltage Directive”
EN 60974-1:2012 Arc Welding Equipment - Part 1: Welding power sources.
Classification: The equipment described in this document is Class A and intended for industrial use.
!
WARNING
This Class A equipment is not intended for use in residential locations where the electrical power is
provided by the public low-voltage supply system. There may be potential difficulties in ensuring electro-
magnetic compatibility in those locations, due to conducted as well as radiated disturbances.
Manufacturer’s Authorized Representative
Steve Ward V.P. Europe and General Manager
Address:Victor Technologies International Inc.
Europa Building
Chorley N Industrial Park
Chorley, Lancashire,
England PR6 7BX
Date: July 10, 2014
Steve Ward
(
Full Name)
V.P. Europe and General Manager
(Position)