Nforce™ led lightbar, Rear, Front – SoundOff Signal nFORCE LED User Manual
Page 5: Gasket mounting instructions
IMPORTANT INFORMATION:
Warning devices are strictly regulated and governed by Federal, State and Municipal ordinances. These devices shall be used ONLY on approved vehicles. It is the sole responsibility of the user of these devices to ensure compliance.
To review our Limited Warranty Statement & Return Policy for this or any SoundOff Signal product, visit our website at
www.soundoffsignal.com/sales-support.
If you have questions regarding this product, contact
Technical Services, Monday - Friday, 8 a.m. to 5 p.m. at 1.800338.7337 (press #4 to skip the automated message).
Questions or comments that do not require immediate attention may be emailed to
SUPERIOR CUSTOMER RELATIONSHIPS. SMARTLY DESIGNED LIGHTING & ELECTRONIC SOLUTIONS.
nFORCE™ LED Lightbar
nForce Lightbar 05.14
REAR
Black 3/8" dia. foam gasket location - Cut to fit
FRONT
Grey gasket location - Cut to fit
GASKET MOUNTING INSTRUCTIONS
1. Cut the Black 3/8" round diameter foam gasket to fit
your lightbar
2. Install the Black 3/8" round diameter foam gasket in
the back slotof the lightbar as shown above
3. Install the Grey gasket in the front slot of the lightbar
as shown above
5.