SoundOff Signal nFORCE Recess Mount User Manual
SoundOff Signal Lighting
1.800.338.7337 / www.soundoffsignal.com
IMPORTANT INFORMATION:
Warning devices are strictly regulated and governed by Federal, State and Municipal ordinances. These devices shall be used ONLY on approved vehicles. It is the sole responsibility of the user of these devices to ensure compliance.
To review our Limited Warranty Statement & Return Policy for this or any SoundOff Signal product, visit our website at
www.soundoffsignal.com/sales-support.
If you have questions regarding this product, contact
Technical Services, Monday - Friday, 8 a.m. to 5 p.m. at 1.800338.7337 (press #4 to skip the automated message).
Questions or comments that do not require immediate attention may be emailed to
SUPERIOR CUSTOMER RELATIONSHIPS. SMARTLY DESIGNED LIGHTING & ELECTRONIC SOLUTIONS.
INFORMATION FOR NEXUS
SECONDARY:
• Warning devices are strictly regulated and governed by Federal, State and Municipal ordinances.
These devices shall be used ONLY on approved vehicles. It is the sole responsibility of the user of these
devices to ensure compliance.
• DO NOT connect this device to a strobe power supply. This product is self-contained and does not
require an external power supply.
ENFSRS1(x) 03.14
Important Information:
INSTALLATION:
RECESS MOUNT
1) Establish a position on the vehicle.
Use the cutout template (provided)
on second page and cut hole. Insert
Grommet into cutout first, then press
light assembly into grommet.
BACK VIEW OF RECESS MOUNT SHOWN
SAE CLASS 1 RECESS MOUNT
DO NOT DAMAGE, BLOCK OR
TOUCH THE BREATHER PATCHES
TECHNICAL SPECIFICATIONS
RECESS MOUNT NEXUS
Single Mount
Dimensions:
5.25”L x 2.25”H x 1.50”D
(See Pg. 2 for Installation Template)
Input Voltage:
10 - 16 Vdc or 10 - 30 Vdc*
CURRENT CONSUMPTION
10-16 Vdc
10-30 Vdc *
6, 12 Split &
18 Tri-Color
<1.0A @12.8 Vdc
<0.6A @ 25.6 Vdc
9 LED Single Color <1.5A @ 12.8 Vdc
<0.9A @ 25.6 Vdc
12 LED Single Color <2.0A @12.8 Vdc
<1.2A @ 25.6 Vdc
WIRE HOOK-UP TABLE
WIRE COLOR:
FUNCTION:
RED
Power
BLACK
Ground
**GREEN
Sync2 *
WHITE to Ground
Pattern Select/
Setup
WHITE to Power
Secondary Fuction
-see page 2-
** To sync multiple NForce™
lights, connect the Green wires
from each light together.
* Will NOT work w/ other sync
products such as Ghost, LED3,
& Intercector.
RECESS MOUNT VERSION
* - Special Order
BLACK
RED
WHITE
GREEN
+Vdc
A FUSE
5
LIGHT ASSEMBLY
GASKET
ENFSRSxx - RECESS MOUNT BLACK GROMMET
ENFSLSRFxx - RECESS MOUNT
1.