E-flite PT-19 450 ARF - Manual (Page 9)

9 E-flite PT-19 ARF Assembly Manual
 16. Mount the servo to the blocks using the two
screws provided with the servo. Use a #1 Phillips
screwdriver to tighten the screws.
 17. Connect a 6-inch (152mm) servo extension to
the lead from the aileron servo.
 18. Use string or dental floss to secure the
extension to the servo lead so they do not
become unplugged inside the wing.
If using string or dental floss to secure your servo
lead, we place a very small drop of thin CA onto
the knot to ensure it does not untie over time.
 19. Remove the tape from the string near
the aileron servo opening in the wing. Tie the
string to the end of the aileron servo extension.
Use the string to pull the extension through the
wing and out of the hole near the center of the
wing as shown.