Location tab, Override location 1, Override location 2 – Rockwell Automation FactoryTalk Historian SE 3.0 H2H Interface User Guide User Manual

Page 65: Override location 3, Override location 4, Override location 5

FactoryTalk Historian To Historian Interface User Guide

Location Tab

Use the Override Tag Location Code Settings check boxes to configure the interface to ignore
individual tag location codes and to apply specific settings for each of the location codes.

Override Location 1

Ignore

Location1

for each tag and load all tags configured for the specified point source

regardless of

Location1

and interface ID values. (

/C1

)

Override Location 2

Ignore

Location2

for each tag and set

Location2

value to be this number for all interface

tags. (

/C2=x

)

Override Location 3

Ignore

Location3

for each tag and set

Location3

value to be this number for all interface

tags. (

/C3=x

)

Override Location 4

Ignore

Location4

for each tag. The value used here should be 1, to have all points for the

interface sign up for exceptions, or 2, to have all points retrieve history only. (

/C4=x

)

Override Location 5

Ignore

Location5

for each tag and set all points for the interface to the same value of this

parameter (i.e., 0, 1, 2, or 3). (

/C5=x

)