Rockwell Automation FactoryTalk Historian SE 3.0 H2H Interface User Guide - Manual (Page 61)

FactoryTalk Historian To Historian Interface User Guide 55
PI2 Security File – Use PI2 security file
The PI2 Security File section is used only if the source host is a PI2 server. If a security file is
to be used, select the Use PI2 security file check box.
PI2 Security File - Unique Part
The Unique part is the name suffix of tag security file on a Historian 2 system. The full name
on the Historian 2 system is
PItoPI<name> .SEC, where < name > is the portion specified in
the Unique part box. ( /SF=uniquename ).
PI2 Security File - User
The User is the login user name of a PI user on Historian 2 node that the interface is to use.
This is used for Historian 2 source systems. (
/LN=username ).
PI2 security File - Password
The Password is the login password of the PI user specified in the User box on Historian 2
node. This is used for Historian 2 source systems. (
/PW=password ).
Additional Parameters
This section is provided for any additional parameters that the current ICU Control does not
support.