Receive and accept the minpak plus controller, Receive and accept the shipment, Store the controller – Rockwell Automation MinPak Plus DC Drive User Manual User Manual

Page 5: File a return request, Drive identification nameplate

1:1

1: Receive and Accept the MinPak Plus

Controller

Receive and Accept the

Shipment

The RelianceR Electric MinPak Plus

SingleĆPhase DĆC Drive (herein

referred to as the Controller) has

been designed, manufactured and

thoroughly tested to provide many

years of reliable service. The

shipping container in which you

received your Controller has been

specifically designed to protect it

during transportation and handling.
Reliance Terms of Sale, in all

instances, are Freight On Board

(F.O.B.) point of origin. It is your

responsibility to thoroughly inspect

the equipment before accepting

shipment from the transportation

company.
If any of the items called for on the

bill of lading or express receipt are

damaged or are not included, do

not accept the shipment until the

freight or express agent makes an

appropriate notation on your freight

bill or express receipt.
The consignee is responsible for

making claim against the carrier for

any shortage or damage occurring

in transit. Claims for loss or damage

in shipment must not be deducted

from the Reliance invoice, nor

should payment of the Reliance

invoice be withheld while awaiting

adjustment of such claims since the

carrier guarantees safe delivery.
If considerable damage has been

incurred and the situation is urgent,

contact the nearest Reliance Sales

Office for assistance. To find the

nearest Reliance Electric Sales

Office for assistance, call tollĆfree

1Ć800Ć245Ć4501.

Store the Controller

After receipt inspection, repack the

Controller in its original shipping

container until ready for installation.

To ensure satisfactory operation at

startup and to maintain warranty

coverage, store the controller as

follows:
D In its original shipping container

in a clean, dry, safe place;

D In an ambient temperature that

does not exceed 65_C (149_F)

or goes below Ć30_C (Ć22_F);

D Within a relative humidity range

of 5 to 95% without

condensation;

D Away from a corrosive

atmosphere. In harsh

environments, cover the

shipping/storage container.

D At an altitude of less than 3,000

meters (10,000 ft.) above sea

level.

File a Return Request

To return the Controller, send a

written request to Reliance Electric

within ten days of receipt. Do not

return equipment without a

numbered Equipment Return

Authorization Form, available from

your local Reliance Electric Sales

Office. To find the nearest Reliance

Electric Sales Office for assistance,

call tollĆfree 1Ć800Ć245Ć4501.

Reliance Electric reserves the right

to inspect the equipment on site.

Drive Identification

Nameplate

Your controller has a nameplate on

the front cover which identifies the

specific model number design,

applicable AĆC input power and DĆC

output power data. Refer to the

nameplate in Figure 1Ć1. All

communications concerning this

product should refer to the

appropriate model number

information.
The technical power information

should be referenced to verify

proper power application.

RELIANCE ELECTRIC COMPANY, CLEVELAND, OHIO 44117 USA

417197Ć47

MINPAK PLUS

M/N

SER NO

AC INPUT

VOLTS

MAX AMPS

SHORT CIRCUIT SYM RMS RATING

ENCLOSURE

KVA

[email protected]

AC OUT

āā

VOLTS

MAX AMPS

I/M

LISTED IND.

CONT. EQ 882R

14C10U

U0001ĆXS

DĆ3838Ć5

50/60

230
180

5000 AMPS

ENCLOSED

W/D30001

WMS

Figure 1Ć1. Typical MinPak Plus Nameplate.