Rockwell Automation MinPak Plus DC Drive User Manual - Manual (Page 10)

2:5
Table 2Ć1B. Remote Operator Control Stations
When UsingA
MinPak Plus
Controller With:
Specify
Operator's
Station Model
Start/Stop
Rocker Switch
Speed Setting
Potentiometer
Run/Jog
Selector
Forward/
Reverse
Selector
Basic Features (Standard
Unidirectional Station) 9C45 yes yes yes no
NEMA type 4 Station with
Basic Features 9C18 yes yes yes no
ExplosionĆProof Station with
Basic Features 9C17 yes yes yes no
Basic Features Plus Armature
Reversing (Standard
Reversing Station) 9C46 yes yes yes yes
NEMA Type 4 Station for
Reversing 9C19 yes yes yes yes
ExplosionĆProof Station for
Reversing 9C16 yes yes yes yes
See Table 2Ć2 for Isolation
Transformer Specifications and
Table 2Ć3 for fuse requirements.
In addition, Reliance offers a wide
range of modification kits which
broaden the application range of
the Basic Controller. These kits are
preĆengineered and all plug into
specific circuits of the Basic
Controller or the Auxiliary Panel. A
summary of these kits is presented
in Table 2Ć4.
Table 2Ć2. Isolation Transformer Specifications.
HP kVA Primary VAC
Secondary
VAC
Reliance Part
Number
1/4-1/3 0.75 230/460 115 77530Ć10S
1/4-1/3 0.75 575 115 Special Order
1/2 1.0 230/460 230 Special Order
1/2 1.0 575 115 Special Order
3/4 1.5 115 115 77530Ć12V
3/4 1.5 575 115 77530Ć11V
3/4 1.5 230/460 115 77530Ć10V
3/4 1.5 230/460 230 Special Order
3/4 1.5 575 230 Special Order
1 2.0 230/460 230 77530Ć8W
1 2.0 575 230 Special Order
1Ć1 1/2 3.0 230/460 230 77530Ć8X
1Ć1 1/2 3.0 575 230 Special Order
2-3 5.0 230/460 230 77530Ć8Y
2-3 5.0 575 230 77530Ć9Y
5 10.0 230/460 230 77530Ć8RC
5 10.0 575 230 77530Ć9RC
NOTE: Smaller drives through 3/4 HP @ 115 VAC and 2.0 HP @ 230 VAC may be used with permanent magnetic field motors, and those drive
models are supplied without a DĆC field supply.