Rockwell Automation 6155F-NPWEDC Compact Non-display Computer - Manual (Page 3)

Rockwell Automation Publication 6155R-UM002E-EN-P - February 2014 3
Summary of Changes
This manual contains new and updated information. Changes throughout this
revision are marked by change bars, as shown to the right of this paragraph.
New and Updated
Information This table contains the changes made to this revision.
Topic Page
Expanded Abbreviations table 8
Added link to Rockwell Automation Product Compatibility and Download Center (PCDC) website 10, 49
Removed ‘Multilingual User-interface CD Pack’ section 10
Reduced what compact discs (CDs) are shipped with computer in ‘Parts List’ section 11
Added Important table in ‘Mounting Clearance Requirements’ section 15
Added two Attention tables in ‘Connect Power’ section 21
Updated IEC numbers for power cord in ‘Connect AC Power’ section 21
Added steps in ‘Connect AC Power’ section 22
Added information in ‘Connect DC Power’ section 22
Added information in ‘Functional Ground Screw’ section 23
Moved ‘Operating Precautions’ section into ‘Operating Guidelines’ section 25
Revised Important table and added information in ‘Start the Computer’ section 26
Replaced ‘reset’ with ‘restart’ in ‘Restart the Computer’ section 27
Updated link to Rockwell Automation Computers and Operators Interface website 29, 37, 47
Added step in ‘Remove the Bottom Plate’ section 32
Added information in ‘CompactFlash Card’ section 33
Replaced table in ‘Upgrade the Memory’ section 37
Added Tip table in ‘Troubleshooting’ section 42
Added information in ‘Diagnostic Utility’ section 44
Added ‘Load the System Defaults’ section 45
Renamed tables 1 and 2 in ‘Specifications’ section 47
Added Turkey RoHS statement in Certifications table 48
Revised information in ‘Upgrade the BIOS from an External CD Drive’ section 49
Revised information in ‘Upgrade the BIOS from an External Floppy Disk Drive’ section 51