Rockwell Automation 6155F-NPWEDC Compact Non-display Computer - Manual (Page 25)

Rockwell Automation Publication 6155R-UM002E-EN-P - February 2014 25
Chapter
3
Operation
Chapter Objectives This chapter provides information on the following topics:
• Operating Guidelines
• Start the Computer
• Restart the Computer
• Shut Down the Computer
Operating Guidelines Follow these operating guidelines for your computer.
• If you are using an external display, turn on the display first.
• Do not operate the computer with the covers removed. Removing the
covers disrupts air flow and results in overheating.
• The processor heat sink can
become hot during computer
operation. This heat is reflected on
the silver metal sides of the
enclosure indicated by an icon. To
reduce the risk of personal injury
from hot surfaces, let these metal
sides cool before touching them.
• Always use the proper power down procedures as required by your
operating system, such as the Shut Down command in the Microsoft
Windows operating system.
• After shutting down the computer, do not apply power again until
shutdown is complete.
For computers with a HDD, the HDD must come to a complete stop,
which can take up to 30 seconds after shutdown is initiated.
SHOCK HAZARD: All covers are required to maintain EMI shield.
Hot Surface
Precaution Icon