Rockwell Automation 6155F-NPWEDC Compact Non-display Computer - Manual (Page 29)

Rockwell Automation Publication 6155R-UM002E-EN-P - February 2014 29
Chapter
4
Component Replacement
Chapter Objectives This chapter provides information on the following topics:
• Accessories and Replacement Parts
• Voltage Precautions
• Electrostatic Discharge Precautions
• Pre-configuration
• Post-configuration
• Required Tools
• Remove the Bottom Plate
• Reinstall the Bottom Plate
• CompactFlash Card
• Drive Precautions
• Replace a Drive
• Replace or Upgrade the Memory Module
• Replace the RTC Battery
Accessories and Replacement
Parts
You can view a list of accessories and replacement parts at the following Rockwell
Automation website:
http://ab.rockwellautomation.com/Computers .
Review the specifications of a new component before installing it to make sure it
is compatible with the computer. Record the model and serial number, and any
other pertinent information of new components for future reference.
Voltage Precautions
The computers contain line voltages. Disconnect all power to the computer
before you install or remove components.
IMPORTANT We recommend that you use only Allen-Bradley approved accessories and
replacement parts.
SHOCK HAZARD: Disconnect all power to the computer before removing
components.
Failure to disconnect power can result in severe electrical shock to an individual or
electrostatic discharge (ESD) damage to the computer and components.