Rockwell Automation 2706-P42_P43_P44_P72_P74_P92_P94 InView Marquee Message Display User Manual - Manual (Page 115)

Publication 2706-UM016D-EN-P - March 2006
InView Protocol 4-49
Set Date
This command is used to set the date.
Format for displaying the date is shown under insert object on
page 4-35.
Special Function command to set Time and Date
Type Code Display Address
Description ASCII Hex Description ASCII Hex Description ASCII Hex
Start of Header ^A 01 All displays Z 5A Display Address 00 3030
Special Function command to set Time and Date Continued
Command Code
Command Function
Description ASCII Hex Description ASCII Hex Description ASCII Hex
Start of Text ^B 02 Write Special Function E 45 Set Date ;
Special Function command to set Time and Date Continued
Command Code (Continued)
Set Date
Set Hour and Minutes HhMm ASCII Hex Description ASCII Hex
January 4, 2001 (Example) 010401 303130343031 End of Text ^C 03
December 5, 2002 (Example) 120502 313230353032
Special Function command to set Time and Date Continued
Command Code
Description ASCII Hex Description ASCII Hex Description ASCII Hex
Start of Text ^B 42 Set Time Format AM/PM ‘S 2753 End of Text ^C 03
Set Time Format 24Hr (Military) ‘M 274D