Rockwell Automation 1763 MicroLogix 1100 Programmable Controllers User Manual - Manual (Page 19)

Publication 1763-UM001D-EN-P - March 2011
Hardware Overview 17
The MicroLogix 1100 supports Ethernet communication via the Ethernet
communication Channel 1. You can connect your controller to a local area
network that provides communication between various devices at 10 Mbps or
100 Mbps. This port supports CIP explicit messaging (message exchange)
only. The controller cannot be used for CIP implicit messaging (real-time I/O
messaging). The controller also includes an embedded web server which
allows viewing of not only module information, TCP/IP configuration, and
diagnostic information, but also includes the data table memory map and data
table monitor screen using a standard web browser.
See Chapter 4 for more information on connecting to the available
communication options.