Rockwell Automation 1763 MicroLogix 1100 Programmable Controllers User Manual - Manual (Page 131)

Publication 1763-UM001D-EN-P - March 2011
Using the LCD 129
If no user defined screen is used in your application program, the screen
is displayed, as shown below.
Note that the U-MSG indicator on the top of the LCD is displayed in
solid rectangle. It means the LCD is in User Defined LCD mode.
If a user defined screen is used in your application program, the LCD
screen is displayed, as shown below, according to the specific
instructions used in your program.
3. Hold down the ESC key more than 3 seconds to return to the Main
Menu screen, as shown below.
COMM0COM
M
1
DCOM
M
BA
T.
LO
U-
M
SG
COM
M
0
COMM1DCOM
M
BA
T.
LO
U-
M
SG