Rockwell Automation 1747-DTAM-E,D17476.1 Data Table Access Module (DTAM) - Manual (Page 89)

Troubleshooting 9-9
Publication 1747-6.1
D1H Maximum connections used – no connections available.
D2H Invalid internet address or host name.
D3H No such host / Cannot communicate with the name server.
D4H Connection not completed before user-spcified timeout.
D5H Connection timed out by the network.
D7H Connection refused by destination host.
D8H Connection was broken.
D9H Reply not received before user-specified timeout.
DAH No network buffer space available.
E1H PCCC Description: Illegal Address Format, a field has an illegal value.
E2H PCCC Description: Illegal Address Format, not enough fields specified.
E3H PCCC Description: Illegal Address Format, too many fields specified.
E4H PCCC Description:Illegal Address Format, symbol not found.
E5H
PCCC Description: Illegal Address Format, symbol is 0 or greater than the
maximum number of characters supported by this device.
E6H
PCCC Description: Illegal Address, address does not exist, or does not
point to something usable by this command.
E7H Target node cannot respond because length requested is too large.
E8H
PCCC Description: Cannot complete request, situation changed (file size,
for example) during multi-packet operation.
E9H PCCC Description: Data or file is too large.
EAH
PCCC Description: Request is too large; transaction size plus word
address is too large.
EBH Target node cannot respond because target node denies access.
ECH
Target node cannot respond because requested function is currently
unavailable.
EDH PCCC Description: Resource is already available; condition already exists.
EEH PCCC Description: Command cannot be executed.
EFH PCCC Description: Overflow; histogram overflow.
F0H PCCC Description: No access.
F1H Local processor detects illegal target file type.
F2H
PCCC Description: Invalid parameter; invalid data in search or command
block.
F3H PCCC Description: Address reference exists to deleted area.
F4H
PCCC Description: Command execution failure for unknown reason;
PLC-3 histogram overflow.
F5H PCCC Description: Data conversion error.
F6H
PCCC Description: The scanner is not able to communicate with a 1771
rack adapter. This could be due to the scanner not scanning, the selected
adapter not responding, or an invalid request of a "DCM BT (block
transfer)".
F7H PCCC Description: The adapter is not able to communicate with a module.
F8H
PCCC Description: The 1771 module response was not valid – size,
checksum, etc.
F9H PCCC Description: Duplicate label.
FAH
Target node cannot respond because another node is file owner (has sole
file access).
FBH
Target node cannot respond because another node is program owner (has
sole access to all files).