Rockwell Automation 1747-DTAM-E,D17476.1 Data Table Access Module (DTAM) - Manual (Page 37)

Monitoring and Modifying Data 5-3
Publication 1747-6.1
Logical Data File
Addressing
SLC 500 family logical addressing can be used with the module to
access all data files except the status file (S2). You may access any
valid address in the attached processor.
1. For example, to access T10:100.ACC you would use the
following key sequence:
Press
>6+,)7@ >7@ >@ >@ >6+,)7@ >@ >@
>@ >@ >$&&@ >(17(5@
As the address is being entered, the address will be displayed in
the lower left-hand corner of the LCD.
2. When the [ (17(5 ] key is pressed, the display shows the logical
address on the top line and its associated value in the lower right-
hand corner:
1. To logically address to the bit level for B3:2/9, use the following
key sequence:
Press
>6+,)7@ >%@ >@ >6+,)7@ >@ >@
>6+,)7@ >@ >@ >(17(5@
2. The LCD displays the logical address on the top line and the on/
off status of that bit on the bottom line:
For more information on logical addressing, see appendix B.
T10:100.ACC
999
Important: Once you press [
6+,)7
] [
7
], [
&
] or [
5
] , it is not
necessary to press the [
6+,)7
] key for [
35(
],
[
$&&
], [
/(1
] or [
326
] .
B3:2/9
. . . . . . . 0 . . . . . . . . . . . .