Rockwell Automation 1770, D17706.5.16 Ref Mnl DF1 Protocol Command - Manual (Page 3)

Summary of Changes
Publication 1770Ć6.5.16 - October 1996
What's Changed in This
Document
This document contains important information concerning the DF1
Protocol and Command Set Reference Manual.
This information extends and explains information provided in the
Data Highway/Data Highway Plus
t/DH-485 Communication
Protocol and Command Set Reference Manual, publication
1770-6.5.16 — November 1991
Changes to this document are indicated by a revision bar in the
margin.
The “look and feel” of your Allen-Bradley documentation has
changed! We’re constantly trying to improve our documentation to
make it more usable for you. If you have questions or comments
about this document, complete the enclosed Publication Problem
Report. In addition, we’ve also made the following changes to
publication 1770-6.5.16:
Change Description Reference
organization We've reorganized the reference manual to make it easier to find
information. We include a map" of this new organization.
Preface, page P-2
commands
We've added and updated the communication commands. We've
also organized them alphabetically. Additional commands include:
• apply port configuration
• change mode
• close file
• disable forces
• get edit resources
• initialize memory
• open file
• protected typed logical read with three address fields
• protected typed logical write with three address fields
• read diagnostic counters
• read section size
• return edit resource
Chapter 7, Communication Commands"
About This Document
Changes to This
Document