Rockwell Automation 1747-L40 SLC 500 Fixed Hardware Style - Manual (Page 50)

3
Chapter
3–1
Mounting Your SLC 500 Control System
This chapter provides you with mounting dimensions for the following SLC
500 components:
•
20 I/O fixed controller
•
30 & 40 I/O fixed controller
•
2–slot expansion chassis
•
link coupler (AIC)
•
Data Table Access Module (DTAM)
You can mount the fixed hardware style units directly to the back panel of
your enclosure using the mounting tabs and #10 and #12 screws. The torque
requirement is 3.4 N–m (30 in–lbs) maximum. Dimensions are in
millimeters. (Dimensions in parentheses are in inches.)
Mounting Fixed Hardware
Style Units