Preface, Additional resources – Rockwell Automation 1407-CGCM Combination Generator Control Module User Manual
Page 7
Rockwell Automation Publication 1407-UM001G-EN-P - April 2013
7
Preface
The information in this manual applies to the 1407-CGCM module, Series C,
Revision D, with host firmware revision 4.9 and ControlNet firmware revision
1.11. The manual notes differences with earlier versions of the product where
they occur.
Additional Resources
These documents contain additional information concerning related products
from Rockwell Automation.
You can view or download publications at
. To order paper copies of technical documentation, contact your local
Allen-Bradley distributor or Rockwell Automation sales representative.
Resource
Description
Safety Guidelines for the Application,
Installation and Maintenance of Solid State
Controls, publication
Describes some important differences between
solid-state equipment and hard-wired
electromechanical devices.
ControlNet Coax Media Planning and
Installation, publication
Provides installation procedures for the
ControlNet network.
Logix5000 Controllers Common Procedures,
publication
Provides information about RSLogix 5000
software.
CGCM Release Notes, public
Provides information on compatible RSLogix
5000 software versions and ControlLogix
controller firmware revisions.
Industrial Automation Wiring and Grounding
Guidelines, public
.
Provides general guidelines for installing a
Rockwell Automation industrial system.
Product Certifications website,
Provides declarations of conformity, certificates,
and other certification details.