Rockwell Automation 1492-PRINT110_PRINT220 ClearTools User Manual - Manual (Page 35)

User Manual General Operation

29
Example 1
We want to label a Marker Card as follows:
The start value will be 1 and the end value will be 3. There will be a block in front of the value,
counting from the number 0. Each number (block plus start value) will be preceded by a P and
concluded by an S. One field will be skipped, i.e. there will be an empty field between the fields
containing data. Each field will be printed twice in succession. The values of the block entry will
start at 0 and be incremented by 2 i.e. 0, 2, 4, 6.
Result: