Rockwell Automation 1492-PRINT110_PRINT220 ClearTools User Manual - Manual (Page 34)

28

General Operation User Manual
Formatted Sequence
The field on the left formats the block, and the field on the right formats the numbering sequence
defined by the start value and end value.
The following formatting options can be used for the block and the numbering sequence. The
block format is only applied if the "Block" field contains an entry.
#.00 The numbers are formatted to two decimal places. For the number
sequence 1 to 3, this produces the following formatted numbers:
1.00 then 2.00 then 3.00, etc.
$#.00 A constant appears before the number (the dollar sign in this example).
#,###.00 Formats the number sequence 1000 to 2000 as follows: 1,000.00 then
1,001.00 then 1,002.00, etc.
0% Formats the number sequence 1 to 5 as 100%, 200%, .., 500%
(percentage).
Preview
The first field is displayed here with its data.
Automatic recognition of field content
The Auto Fill function attempts to identify the text of the first selected field so it can put
appropriate default settings in the "Consecutive numbering" dialog.
For example, if a text field contains A4.0X, the system recognizes that A is the prefix, X is the
suffix, the block counter is 4 and the start value is 0.