Rockwell Automation 1492-PRINT110_PRINT220 ClearTools User Manual - Manual (Page 131)

User Manual Importing files

125
For this option, a marker type must be opened.
The import is effected starting with the first marker of the selected marker type.
New marker type in current project

Click on "Catalog" to select a marker type from the catalog or from the saved templates
(*.mpt).
A new marker type is added to the current project during the import.
New Project

Click on "Catalog" to select a marker type from the catalog or from the saved templates
(*.mpt).
The import is effected into a new project with the selected marker type.
If a non-saved other project/marker type is still open, a confirmation prompt is
displayed before the import starts.
Step 4/5: Selecting data format and field delimiter
Select whether the columns in the source file are defined by delimiters (e.g. by semi-colons,
tabs) or have a fixed column width (see section "Source file with delimiters" or "Source file with
fixed column width").
In addition, you can select:

Data lineage
Specify the operating system used to create the file.

Text delimiting character
Text characters between the text delimiting characters are interpreted as being text.
Delimiters are thus ignored (masked).