Rockwell Automation 1492-PRINT110_PRINT220 ClearTools User Manual - Manual (Page 160)

154

Print User Manual
If necessary, repeat these steps to check the position of the coordinate plane.
Adjusting the size of the marker type
Marker types may not be their normal size, for example as a result of the ambient temperature.

Click on the Adjust Marker Type... button, or select Adjust Marker Type... from the File menu.
The following dialog appears.

In the Options area select the printers for which these settings shall be set.

Measure the width and height of the marker type as shown, and enter the figures in the
Width (X) and Height (Y) fields.

Close the window with OK.