Noise reduction, Angle filtering – Barco R5976934 User Manual
Page 66
5. The On Screen Display (OSD)
5-24 __________________________________________________________Barco - LC series - R5976934 - user's manual - Revision 08 - April 2008
Noise Reduction
Noise reduction can be selected to off, low, medium, or high.
Noise is generally visible as "snow", or small dots that make the picture look fuzzy, With
Noise Reduction
the
amount of noise attenuation can be specified.
RCU
Push button (1: top most)
• Use the up and down cursor keys to navigate to
the Noise Reduction
• Press 5 and 6 to navigate to Noise Reduction
• Use the left and right cursor keys to select one
of the options Off, Low, Medium, High
The current selection is visualized by a white
caption.
• Use 3 and 4 to select one of the options Off, Low,
Medium, High
The current selection is visualized by a white cap-
tion.
The selection is applied without any further action.
Angle Filtering
Angle filtering can be selected to on or off.
RCU
Push button (1: top most)
• Use the up and down cursor keys to navigate to
the Angle Filtering
• Press 5 and 6 to navigate to Angle Filtering
• Use the left and right cursor keys to select one
of the options Off, On
The current selection is visualized by a white
caption.
• Use 3 and 4 to select one of the options Off, On
The current selection is visualized by a white cap-
tion.
The selection is applied without any further action.