Barco R5976934 - Manual (Page 127)

12. Accessories
Barco - LC series - R5976934 - user's manual - Revision 08 - April 2008 _____________________________________________________________________________________ 12-13
12.5.2 Installation
The rear plate of the tiltable wall mount bracket is attached to the wall by means of 5 screws M8 (for specifica-
tion of the screws, cf.
Required tools .). It is the same bracket for 42" and 47".
For drilling the holes in the wall, it is recommended to use a jig – take a sheet of paper
(A3) and copy the distances given in the drawing below.
• Drill 5 holes, 10mm, to the wall in the given distances!
• Slid in the knurled bolts of the screen bracket into the keyholes of the wall mount and lock them by turning
the lock bar.