beautypg.com

Installation, 12 accessories, 1 required tools – Barco R5976934 User Manual

Page 115

background image

12. Accessories

Barco - LC series - R5976934 - user's manual - Revision 08 - April 2008

______________________________________________________________________________________

12-1

12 Accessories

The monitor can be equipped with a table stand, or mounted to the wall or the ceiling. The following chapter
describes assembling and installation of the accessories.

12.1 Required tools

• Screwdriver for recessed head screws (screw size M8)

Wall mount and ceiling mount:
• Wrench 10mm, 17mm, 19mm
• Allen wrench size 2.5 to adjust the tilt angle of the long/short ceiling mount
• Drilling machine to drill the holes into concrete
• 4 fixation screws per wall mount / ceiling mount
• 1 additional (center) fixation screw for the tiltable wall mount
• 4 (5) dowels (concrete)

The manufacturer of the accessories gives the following recommendation:

Specification of screws for wood: DIN 571 M8x80 4.6

Specification of screws for concrete DIN 16168 M8x75