Barco R5976934 - Manual (Page 29)

2. Unpacking and installation
Barco - LC series - R5976934 - user's manual - Revision 08 - April 2008 ________________________________________________________________________________________ 2-7
2.3 Examining the monitor
2.3.1 Front view
An LED on the bottom right edge indicates the operating status of the monitor.
LED indicator Mode
Orange Standby
Green In operation
Next the to LED indicator the sensor to receive the commands from the IR control unit is located as well as the
light sensor to determine the surrounding light intensity.
Take care that the sensors are not blocked by any objects placed in front of the monitor!
The preset for dim adjustment and bright adjustment can be set and controlled via the OSD, cf. 5.6.4 L .
2.3.2 Side view
><
>/+
ENTER
Menu
The control elements of monitors are located on the right (seen from front). The 7 push buttons allow switching
the monitor from and to standby, to adjust volume and to activate and operate the OSD.
Item Refers to Function
1 Standby / switch into operation
2
ENTER
Activate selection
3
>/+
Scroll right for menu items / volume increase
4 Scroll left for menu items / volume decrease
5
<
Scroll down for menu ite ms / Access signal input menu
6
>
Scroll up for menu items
7
Menu
OSD control menu button / Access or exit main menu /
Access or exit submenu / Exit selection