Rockwell Automation 193-ETN E1 Plus EtherNet Side Mount Module User Manual - Manual (Page 92)

92 Rockwell Automation Publication 193-UM012B-EN-P - June 2011
Appendix B
The following instance attributes are implemented for all parameter attributes:
The following common services are implemented for the PCP Object:
TCP/IP Interface Object — CLASS CODE 0xF5
The following class attributes are supported for the TCP/IP Interface Object:
The following instance attributes are implemented for all parameter attributes:
Table 41 - PCP Object Instance Attributes
Attribute ID Access Rule Name Data Type Value
1 Get/Set MCC Number USINT 0-255
2 Get/Set Vertical Section Number USINT 0-255
3 Get/Set Starting Section Letter USINT 0-255
4 Get/Set Space Factors USINT 0-0x3F
5 Get/Set Cabinet Width USINT 0-255
6 Get/Set Controlled Device USINT 0-255
7 Get Number of Device Inputs USINT 2
8 Get/Set Devices Connected at Inputs Array of USINT
9 Get Number of Device Outputs USINT 1
10 Get/Set Devices Connected at Outputs Array of USINT
Table 42 - PCP Object Common Services
Service
Code Implemented for: Service Name
Class Instance
0x01 No Yes Get Attribute All
0x02 No Yes Set Attribute All
0x0E Yes Yes Get Attribute Single
0x10 No Yes Set Attribute Single
Table 43 - TCP/IP Interface Object Class Attributes
Attribute ID Access Rule Name Data Type Value
1 Get Revision UINT 1
Table 44 - TCP/IP Interface Object Instance Attributes
Attribute ID Access Rule Name Data Type Value
1 Get Status DWORD N/A
2 Get Configuration capability DWORD 0x00000014
3 Get/Set Configuration control DWORD N/A