Rockwell Automation 193-ETN E1 Plus EtherNet Side Mount Module User Manual - Manual (Page 90)

90 Rockwell Automation Publication 193-UM012B-EN-P - June 2011
Appendix B
The following common services are implemented for the Control Supervisor
Object:
101 Get Warning Status WORD Bit 0=Overload
Bit 1=Not Used
Bit 2=Jam
Bit 3=Underload
Bit 4=Not Used
BIt 5=Comm Fault
Bit 6=Comm Idle
Bit 7=Non Vol Mem Fault
Bit 8-Bit 15=Not used
102 Get Trip Log 0 WORD Last trip condition. Bit definitions of the value are the same as attribute 101
103 Get Trip Log 1 WORD Last trip condition. Bit definitions of the value are the same as attribute 101
104 Get Trip Log 2 WORD Last trip condition. Bit definitions of the value are the same as attribute 101
105 Get Trip Log 3 WORD Last trip condition. Bit definitions of the value are the same as attribute 101
106 Get Trip Log 4 WORD Last trip condition. Bit definitions of the value are the same as attribute 101
107 Get Device Status WORD Bit 0=Trip
Bit 1=Warning
Bit 2=OutputA
Bit 3=Input 1
Bit 4=Input 2
Bit 5=Motor Current
Bit 6-Bit 15=Not used
108 Get/Set Trip Enable WORD Bit 0=Not Used
Bit 1=Not Used
Bit 2=Jam
Bit 3-Bit 15=Not Used
109 Get/Set Warning Enable WORD Bit 0=Overload
Bit 1=Not Used
Bit 2=Jam
Bit 3=Underload
Bit 4=Not Used
BIt 5=Comm Fault
Bit 6=Comm Idle
Bit 7-Bit 15=Not Used
110 Get/Set OL Reset Mode BOOL 0=Manual
1=Automatic
111 Get/Set IN1 Assignment USINT 0=Normal
1=Trip Reset
2=OL Contact
112 Get/Set IN2 Assignment USINT 0=Normal
1=Trip Reset
2=OL Contact
Table 37 - Control Supervisor Object Instance 1 Attributes
Attribute ID Access Rule Name Data Type Value
Table 38 - Control Supervisor Object Common Services
Service
Code Implemented for: Service Name
Class Instance
0x0E No Yes Get Attribute Single
0x10 No Yes Set Attribute Single
0x05 No Yes Reset