Rockwell Automation 193-ETN E1 Plus EtherNet Side Mount Module User Manual - Manual (Page 81)

Rockwell Automation Publication 193-UM012B-EN-P - June 2011 81
Appendix
B
EtherNet/IP Information
Electronic Data Sheets Electronic Data Sheet (EDS) files are specially formatted ASCII files that provide
all of the information necessary for a configuration tool (e.g., RSNetWorx for
EtherNet/IP) to access and alter the parameters of a device. The EDS file
contains all the parameter information of a device: number of parameters,
groupings, parameter name, min., max, and default values, units, data format and
scaling. The EDS file for the E1 Plus EtherNet/IP Module is available from the
Internet at www.ab.com/networks/eds/index/html. It can also be built
automatically by some configuration tools since all of the information necessary
for an EDS file may be extracted from the E1 Plus EtherNet/IP Module.
EtherNet/IP Objects The following object classes are supported.
Identity Object — CLASS CODE 0x01
The following class attributes are supported for the Identity Object:
Table 9 - EtherNet object Classes
Class Object
0x01 Identity
0x02 Message Router
0x04 Assembly
0x06 Connection Manager
0x08 Discrete Input Point
0x09 Discrete Output Point
0x0F Parameter
0x10 Parameter Group
0x29 Control Supervisor
0x2C Overload
0xC2 PCP
0xF5 TCP/IP Interface
0xF6 Ethernet Link
Table 10 - Identity Object Class Attributes
Attribute ID Access Rule Name Data Type Value
1 Get Revision UINT 0x0001