Rockwell Automation 193-ETN E1 Plus EtherNet Side Mount Module User Manual - Manual (Page 86)

86 Rockwell Automation Publication 193-UM012B-EN-P - June 2011
Appendix B
Two instances of the Discrete Input Point Object are supported as follows:
The following common services are implemented for the Discrete Input Point
Object:
Discrete Output Point Object — CLASS CODE 0x09
The following class attributes are supported for the Discrete Output point
Object:
A single instance is implemented and contains the following attributes:
Table 26 - Discrete Input Point Object Instances
Attribute ID Access Rule Name Data Type Value
3 Get Value BOOL 0=OFF
1=ON
Table 27 - Discrete Input Object Common Services
Service
Code Implemented for: Service Name
Class Instance
0x0E Yes Yes Get Attribute Single
Table 28 - Discrete Output Point Object Class Attributes
Attribute ID Access Rule Name Data Type Value
1 Get Revision UINT 0x0001
2 Get Max Instance UINT 0x0001
Table 29 - Discrete Output Point Object Instance 1 - Output A
Attribute ID Access Rule Name Data Type Value
3 Get Value BOOL 0=OFF
1=ON
5 Get/Set Fault Action BOOL 0=Fault Value
Attribute
1=Hold Last State
6 Get/Set Fault Value BOOL 0=OFF
1=ON
7 Get/Set Idle Action BOOL 0=Fault Value
Attribute
1=Hold Last State
8 Get/Set Idle Value BOOL 0=OFF
1=ON
113 Get/Set Pr Fault Action BOOL 0=Pr Fault Value
Attribute
1=Ignore
114 Get/Set Pr Fault Value BOOL 0=OFF
1=ON