Rockwell Automation 193-ETN E1 Plus EtherNet Side Mount Module User Manual - Manual (Page 38)

38 Rockwell Automation Publication 193-UM012B-EN-P - June 2011
Chapter 4
1. Open the Controller Tags window.
2. Select the Monitor Tags tab.
Three tags, "E1Plus:C", "E1Plus:I" and "E1Plus:O", have been added to
represent the three I/O Instances: Configuration, input and output. The
Configuration Instance was created even though its size was configured as
zero. The E1Plus:I tag represents input data, which is data coming from
the E1Plus into the controller (%FLA, %TCU, Trip Status, Warning
Status, etc.). The E1 Plus:O tag represents output data, which is data going
from the controller out to the E1 Plus (Enable Output A, Trip Reset, etc.).
ControlLogix Generic Configuration
An existing project can be used or a new project can be created to configure
EtherNet/IP I/O messaging. To create a new configuration in RSLogix 5000,
select File
→ New.