Rockwell Automation 20A PowerFlex 70 Adjustable Frequency AC Drive - Manual (Page 47)

Rockwell Automation Publication 20A-IN009D-EN-P - June 2013 47
PowerFlex 70 Adjustable Frequency AC Drive
Running S.M.A.R.T. Start
During a startup, the majority of applications require changes to a few
parameters. The LCD HIM on a PowerFlex 70 drive offers S.M.A.R.T. start, and
displays the most commonly changed parameters. With these parameters you can
set the following functions:
• S – Start Mode and Stop Mode
• M – Minimum and Maximum Speed
• A – Accel Time 1 and Decel Time 1
• R – Reference Source
• T – Thermal Motor Overload
To run a S.M.A.R.T. start routine, follow the steps in this table:
Running an Assisted Startup
The assisted start-up routine prompts you to input required information. Access
assisted startup by selecting Start Up from the Main Menu.
To perform an assisted startup, follow the steps in this table:
Step Key(s) Example LCD Displays
1. Press ALT and then Esc (S.M.A.R.T). The S.M.A.R.T. start
screen appears.
2. View and change parameter values as desired. For HIM
information, see Appendix B.
3. Press Esc to exit the S.M.A.R.T. start.
IMPORTANT This start-up routine requires an LCD HIM.
Step Key(s) Example LCD Displays
1. In the Main Menu, press the up arrow or down arrow to
scroll to Start Up.
2. Press Enter.
IMPORTANT You must select Done/Exit after you complete the start-up routine for the
start-up/autotune data to be saved.
ALT Esc
Esc
F-> Stopped Auto
0.0 Hz
Main Menu:
Diagnostics
Parameter
SMART List:
Digital In2 Sel
Stop Mode A
Minimum Speed
F-> Stopped Auto
0.0 Hz
Main Menu:
Memory Storage
Start Up
Preferences