Rockwell Automation 20A PowerFlex 70 Adjustable Frequency AC Drive - Manual (Page 20)

20 Rockwell Automation Publication 20A-IN009D-EN-P - June 2013
PowerFlex 70 Adjustable Frequency AC Drive
Power Terminal Block
Figure 7 - Typical Power Terminal Block Location (B frame shown)
Table 5 - Power Terminal Block Specifications
Table 6 - Wire Routing Recommendations
No. Name Frame Description
Wire Size Range
(1)
(1) Maximum/minimum sizes that the terminal block can accept – these are not recommendations.
Torque
Max
mm
2
(AWG)
Min
mm
2
(AWG)
Max
N•m (lb•in) Recommended
N•m (lb•in)
➊ Power
terminal block A, B, C Input power and
motor
connections 4.0 (10) 0.3 (22) 1.1 (10) 0.8 (7)
D Input power and
motor
connections 10.0 (6) 0.8 (18) 1.7 (15) 1.4 (12)
E Input power and
motor
connections 25.0 (3) 2.5 (14) 2.71 (24) 2.71 (24)
➋ SHLD terminal All Terminating
point for wiring
shields — — 1.6 (14) 1.6 (14)
No. Description
➌ Suggested entry for incoming line wiring.
➍ Suggested entry for motor wiring.
IP 20 (NEMA/UL Type 1)
IP 66 (NEMA/UL Type 4X/12)