Rockwell Automation 22F PowerFlex 4M User Manual FRN 1.xx - 2.xx - Manual (Page 3)

PowerFlex 4M Adjustable Frequency Drive FRN 1.xx - 2.xx User Manual
Publication 22F-UM001D-EN-E
Summary of Changes
The information below summarizes the changes to the PowerFlex 4M
User Manual since the July 2008 release.
Manual Updates
The information below summarizes the changes to the PowerFlex 4M
User Manual since the August 2007 release.
Manual Updates
Description of New or Updated Information Page(s)
Minimum Enclosure Volume column and new footnotes added. 1-8 , A-2
Drive, Fuse & Circuit Breaker Ratings topic updated. A-1
Electronic Motor Overload Protection description updated. A-4
Description of New or Updated Information Page(s)
Footnote (2) deleted from “EN61800-3 Second Environment” in Table 1.I . 1-22
Note to stop drive before changing parameter t211 [Anlg In 0-10V Lo]
removed.
3-14
New option 13, I/O Control, for parameter t221 [Relay Out Sel] added. 3-15
Fault description for F3 corrected. 4-3
Corrected Table B.F by adding the 0.75 kW (1.0 HP) and 1.5 kW (2.0 HP)
ratings for the 22F-RF025-BL EMC line filter.
B-4
Description for bits 14, 13, and 12 of register address 8192 corrected. C-4
Information on reading register address 8192 clarified. C-4
Description for bits 6, 7, and 15 of register address 8192 updated. C-4
Information on reading register address 8193 clarified. C-5
Figure C.1 , Network Wiring Diagram, updated. C-1
Guidelines on standard RS485 wiring practices added. C-1