Rockwell Automation 48MS MultiSight Vision Sensor - Manual (Page 50)

MultiSight™ User Manual
Setup—Quick Guide
50 10000000877(02)
7. Slowly adjust the manual focus on the back of the MultiSight using the small screw driver until the image comes into focus.
You may need to adjust the shutter speed more to get the best image. The ideal is to have a high level of contrast and a sharp
focus.
8. Click Stop in the Image window to exit live image mode.
Define Search Criteria
The next step is to position the Region of Interest (ROI) and Pattern frames. The yellow ROI frame defines WHERE the sensor will look
for a pattern; the red Pattern frame will define WHAT the sensor will look for.
9. By default, the yellow ROI frame will be selected – notice the dot at each corner and along each side. Double click the red
frame to select it. Position and resize the red pattern frame around the unique feature to be inspected (the pattern that will
always be there on a good part and never for a bad part).
10. Next adjust the yellow Region of Interest (ROI) frame. This frame defines WHERE the sensor will look for the pattern we
defined with the red box. This means it must always be bigger than and completely containing the red frame. Double click the
yellow frame to select it. Move and resize the frame.