Yamato Scientific SQ 510 Autoclave, Sterilizers - Manual (Page 40)

37
Operation Method
Sample Temperature Function
Sample temperature function
This function counts the sterilization/melting time by the temperature measured by the sample
temperature sensor. Set "on" to the setting of sample temperature sensor in the maintenance setting.
MANUAL MELT
PRE HEAT
AUTO
TEMP
PRES.
STERILIZE/MELT
HEAT
EXHAUST
WARM
SAMPLE
STERILIZE
WARM /LIQUID
COOLING
FAN
WARM
℃
END
TIME
MAINT.
ENTER ENTER
WARM STERILIZER
/MELT STERILIZER
/MELT
START
WARM
STERILIZE
/NORMAL
STERILIZE SET
MEMORY
START/ STOP
① Make sure that the course to be operated is selected and then
press the SAMPLE key.
The SAMPLE lamp lights up and the temperature display
screen displays the temperature measured by the sample
temperature sensor.
② Press the START/STOP key to start the operation. During the
sterilization and melting processes, the display can not be
switched.