Yamato Scientific SQ 510 Autoclave, Sterilizers - Manual (Page 25)

22
Operation Method
Operation Course/Function List
The equipment can carry out the following operation courses.
Name Description Page
This course sterilizes apparatus made of metal, glass, rubber and
ceramics.
Apparatus
sterilization course
• Press the STERILIZE/NORMAL key to go into the operation setting
mode.
• If other course has been selected, press the STERILIZE/NORMAL key
again.
• Set the temperature with the TEMP key and then press the ENTER key.
• Set the time with the TIME key and then press the ENTER key.
• Press the START/STOP key to start operation.
• Press the START/STOP key again to stop operation.
This course sterilizes liquid such as water, medium, test solution and test
reagent.
Liquid sterilization
course
• Press the STERILIZE/LIQUID key to go into the operation setting mode.
• If other course has been selected, press the STERILIZE/LIQUID key
again.
• Set the temperature with the TEMP key and then press the ENTER key.
• Set the time with the TIME key and then press the ENTER key.
• Press the START/STOP key to start operation.
• Press the START/STOP key again to stop operation.
27
This course sterilizes medium and then keeps them warm.
Sterilization &
Warm course
• Press the STERILIZE→WARM key to go into the operation setting
mode.
• If other course has been selected, press the STERILIZE→WARM key
again.
• Set the sterilization time and sterilization temperature.
• Set the temperature with the TEMP key and then press the ENTER key.
• Set the time with the TIME key and then press the ENTER key.
• Set the heat-retention time and heat-retention temperature.
• Set the temperature with the TEMP key and then press the ENTER key.
• Set the time with the TIME key and then press the ENTER key.
• Press the START/STOP key to start operation.
• Press the START/STOP key again to stop operation.
This course melts medium and then keeps them warm.
Melting & Warm
course
• Press the MELT→WARM key to go into the operation setting mode.
• If other course has been selected, press the MELT→WARM key again.
• Set the melting time and sterilization temperature.
• Set the temperature with the TEMP key and then press the ENTER key.
• Set the time with the TIME key and then press the ENTER key.
• Set the heat-retention time and heat-retention temperature.
• Set the temperature with the TEMP key and then press the ENTER key.
• Set the time with the TIME key and then press the ENTER key.
• Press the START/STOP key to start operation.
• Press the START/STOP key again to stop operation.
29