Yamato Scientific SQ 510 Autoclave, Sterilizers - Manual (Page 36)

33
Operation Method
Maintenance Mode
℃
ENTER ENTER
TEMP
WARM
TIME
WARM STERILIZER
/MELT
STERILIZER
/MELT
Ex):
when the accumulated time is 39999
hours
WARM
STERILIZER
/MELT
⑪ The accumulated time screen is displayed.
The time display screen displays the character "Accm", which
indicates the accumulated time. The temperature display
screen displays the accumulated time.
Check the time and press the ENTER key to determine it.
™ The accumulated time function accumulates the current-carrying
time by the hour.
・
When the accumulated time is 10000 hours or more:
→ The decimal-point character for one-hour unit lights up.
・ When the accumulated time is 20000 hours or more:
→ The decimal-point character for ten-hour unit lights up.
・ When the accumulated time is 3000 hours or more:
→ The decimal-point character for hundred-hour unit lights up.
・ This function does not accumulate time more than 4000 hours.
(The maximum is 39999 hours.)
™ The accumulated time can be reset by pressing the ∧ and ∨
on the TEMP key at the same time while the accumulated time is
displayed.
MANUAL MELT
PRE HEAT
AUTO
TEMP
PRES.
STERILIZE/MELT
HEAT
EXHAUST
WARM
SAMPLE
STERILIZE
WARM /LIQUID
COOLING
FAN
WARM
℃
END
TIME
MAINT.
ENTER ENTER
WARM STERILIZER
/MELT STERILIZER
/MELT
START
WARM
STERILIZE
/NORMAL
STERILIZE SET
MEMORY
START/
STOP
⑫ The setting returns to Step ①.
Press the MAINT. key to terminate the setting procedures.