Yamato Scientific SQ 510 Autoclave, Sterilizers - Manual (Page 35)

32
Operation Method
Maintenance Mode
℃
ENTER ENTER
TEMP
WARM
TIME
WARM STERILIZER
/MELT
STERILIZER
/MELT
⑧ The buzzer setting screen is displayed.
The time display screen displays the character "_bUZ", which
indicates the buzzer setting. The temperature display screen
displays "on" or "oFF" with blinking.
Press the ∧∨ on the TEMP key to select "on" or "oFF".
Press the ENTER key to determine the setting.
(The setting is "on" at factory shipment.)
℃
ENTER ENTER
TEMP
WARM
TIME
WARM STERILIZER
/MELT
STERILIZER
/MELT
⑨ The error log screen is displayed.
The time display screen displays the character "_Err", which
indicates the error log. The temperature display screen
displays nothing.
Press the ∧∨ on the TEMP key to check the error log.
The content of errors and their time of occurrence are
displayed.
Press the ENTER key to go into the setting screen for sample
temperature.
Error log display
For example, Error 1 occurred at 11:59 p.m. on December 31, 2005;
℃
ENTER ENTER
TEMP
WARM
TIME
WARM STERILIZER
/MELT
STERILIZER
/MELT
⇔
Displayed
alternately every
two seconds
℃
ENTER ENTER
TEMP
WARM
TIME
WARM STERILIZER
/MELT
STERILIZER
/MELT
Press the ∧∨ on the TEMP key to select the error No.
℃
ENTER ENTER
TEMP
WARM
TIME
WARM STERILIZER
/MELT
STERILIZER
/MELT
℃
ENTER ENTER
TEMP
WARM
TIME
WARM STERILIZER
/MELT
STERILIZER
/MELT
⑩ The sample temperature setting screen is displayed.
The time display screen displays the character "SmPL", which
indicates the sample temperature setting. The temperature
display screen displays "on" or "oFF" with blinking.
Press the ∧∨ on the TEMP key to select "on" or "oFF".
Press the ENTER key to determine the setting.
(Set "on" here when an optional accessory is attached. The
setting is "oFF" at factory shipment.)