Sensaphone IMS-1000 Users manual - Manual (Page 43)

Chapter 2: Configuration
43
IP Alarms
Message 11: “Company XYZ SMTP server”
Message 12: “Company XYZ web server”
Message 13: “NY office FTP server”
..
..
Message 27: “Chicago network Gateway”
Identification Message
Message 30: “The data center monitoring system in the Chicago office, 14th floor”
In this example we have grouped the environmental inputs into message numbers 1-10, the IP
Alarm messages into 11-27, and the ID message into 30.
Step 2 is to call into the IMS-1000 and record your messages. When the unit answers it will ask for
your User Code, then it will speak the menu below. Message recording is prompted with a beep.
Press any touch-tone to end message recording.
For an Alarm Summary Report, Press 1
To listen to an Environmental Status Report, Press 2
To listen to an IP Status Report, Press 3
To play or record a voice message, Press 4
To control the relay output, press 5
To repeat this Menu , Press 0.
Step 3 is to type your message descriptions into the entry fields on the Voice Settings screen. Click
Settings, then Voice from the web Page. Enter each message description, then click Save. See exam-
ple below:
Fig. 12 : Voice Settings Screen