Sensaphone 400 User Manual
Page 94
92
SENSAPHONE 400 User’s Manual
Code 4: Pause
Code 5: Star (*)
Code 6: Pound (#)
Description
Touch-Tone Command
Setting a phone number
S(7) + T(8) + (entry 1–4) + (telephone num-
ber) + #
Description
Touch-Tone Command
Reciting a phone number
W(9) + T(8) + (entry 1–4)
Record and Play Custom Voice Messages
The following commands will allow you to record and play back custom
voice messages for the ID message (0) and each zone (1–4).
Description
Touch-Tone Command
Record a Message
S(7) + M(6) + (entry 0–4)
Description
Touch-Tone Command
Play a Message
W(9) + M(6) + (entry 0–4)
Control the Relay Output
The following commands will allow you to check the status of the relay out-
put and to toggle the Relay Output On and Off.
Description
Touch-Tone Command
Reciting the Output Status
W(9) + R(7) + O(6)
Description
Touch-Tone Command
Switching the Output
S(7) + R(7) + O(6)
Activate Microphone Listen-in
The following command will allow you to activate the microphone listen-in
for the programmed duration.
Description
Touch-Tone Command
Activate Mic Listen-in
M(6) + I(4) + C(2)