Sensaphone 400 - Manual (Page 62)

60
SENSAPHONE 400 User’s Manual
4 .13 InterCall tIme
The Intercall Time is the programmable period of time the Model 400 waits
in calling subsequent telephone numbers. Intercall Time is activated only
after alarm dial-out to the first telephone number fails to be acknowledged.
This period can be programmed from 10 seconds to 60 minutes. The
default intercall time is 1 minute.
If an incoming telephone call is made to the Model 400 during Intercall
Time (in between its dialing of subsequent telephone numbers to report an
alarm), it will answer the incoming call and immediately report any exist-
ing alarms.
4 .13 .1 programmIng InterCall tIme
To program Intercall Time:
1. Press SET.
SET
2. Press INTERCALL TIME.
3
INTERCALL
TIME
The Model 400 will respond: “Enter minutes.”
3. Using the number keys, enter the minutes.
4
MAX CALLS
5
TEMP LIMITS
6
CALIBRATE
8
CLOCK
3
INTERCALL
TIME
7
RECOGNITION
TIME
9
LISTEN TIME
SOUND
0
ID NUMBER
POWER
1
CALL
DELAY
2
VOICE
REPS
The Model 400 recites the digits as you press them.
4. Press ENTER. The Model 400 will respond: “Enter seconds.”
ENTER
PM