beautypg.com

Chapter 4: communications programming – Sensaphone 400 User Manual

Page 41

background image

Chapter 4: Communications Programming

39

Chapter 4: CommunICatIons
programmIng

This chapter explains the keypad commands for communications program-

ming of the Model 400, including interrogation and resetting of the follow-

ing:

• Voice Messages
• The Unit ID Number
• Dial-out Telephone Numbers
• Tone or Pulse Dialing
• Special Dialing with Pagers, Beepers and Access Numbers.
• Dial-out test mode
• Rings Until Answer
• Telephone Answering Device Compatibility
• Listen-in Time
• Call Delay
• Local Voice Mute
• Voice Repetitions
• Intercall Time
• Maximum Number of Calls
• The Clock
• Security Code

4 .1 voICe meSSageS

The 400’s digital speech recording feature allows you to record custom

messages for each of the four Zones and an ID Message. This means that

when the 400 calls you during an alarm, you will hear a personalized Voice

Message identifying the unit and telling you exactly what alarm condition

exists. You can record a separate message for each of the four Zones. The

message can run a maximum of 5 seconds. The ID Message can be a maxi-

mum of 8 seconds. You can shorten the message length by pressing the

ENTER key after reciting the message.
The ID message is used to identify the unit. This could be a particular

building name, its location (address or city), or some other identifier.