4 .11 local voice mute – Sensaphone 400 User Manual

Page 60

SENSAPHONE 400 User’s Manual

2. Press CALL DELAY.

CALL

DELAY

The Model 400 will recite the programmed Call Delay.

4 .11 loCal voICe mute

When the Model 400 dials out to report an alarm, it also audibly recites the

alarm message through it’s speaker. The Local Voice Mute command allows

you to turn off the speaker at the Model 400’s site during alarm dialouts

and status call-ins. This feature is used to prevent intruders or unauthor-

ized persons from hearing the alarm dial-out message or from hearing the

Status Report during an off-site call.

4 .11 .1 enable/dISable loCal voICe mute

To enable/disable Local Voice Mute:

1. Press SENSOR ON/OFF.

SENSOR

ON/OFF

2. Press MUTE.

CODE

LOCK

MUTE

The Model 400 will say “Mute On” to indicate that Local Voice Mute is

enabled, or “Mute Off” to indicate that it is disabled.
3. Repeat key sequence to switch between enabled or disabled Local Voice

Mute.